The ULS Series level transmitter is a ultrasonic sensor designed to measure distances up to 9 meters.
The working principle of the ultrasonic sensors is based on a sound emission from the sensor and its reflection by an obstacle. Depending on the speed of propagation and time elapsed since the emission, the distance between the sending and the receiving is calculated proportionally. It can be used in liquids and in solids evironments. It also can be used even in very thin structures.
Available with 0-10VDC, 0-5V, 0.5-5V, 0-20mA, 4-20mA, RS485, RS232, CANOpen and switch output options.
|Model||Housing material||Measuring distance||Analog output||Digital output||Switch output||Electrical connection|
|D- Delrin||9- 9 meters||No code- No analog output||No code- No digital output||No code- No switch output||S14M- M12, 8-pins male socket|
|V0- 0-10V||C- CANOpen||OCP- PNP open collector||S10FM- M12, 8-pins male socket + M12, 5-pins female socket|
|V1- 0-5V||S1- RS-232||1M- 1 meter cable (standard*)|
|V3- 0.5-4.5V||S2- RS-485|
(*) Custom ranges available
Note: S10FM coded socket should be selected if PNP Open Collector output is used, S14M coded socket should be selected if PNP Open Collector output or tare input is not used.
|Ultrasonic level sensor ULS Series datasheet (English)||13/07/2020||683KB|
|Ultrasonic level sensor ULS Series user manual (English)||13/07/2020||1.1MB|
|ModBus protocol - Ultrasonic level sensor ULS Series (English)||13/07/2020||260KB|