+55 (16) 3371-0112 •

UD Series Laser Diodes

Image UD

Diode lasers of LAP UD Series are designed for installation low above the working surface.

The UD series was the answer on customers requests for a laser with small housing like LD series, line length and quality of UltraLine to be built in low above working level.

The main target for UD lasers are veneer or sheet metal shears, as well as any place where you have little headroom but you need a long line, starting directly below the laser. You need a 4 m line, you only have 50 cm of height and the laser must be installed on one side of the opening ? Then you need a UD laser!

The laser line starts directly below the laser, caused by a cylindrical lens and the beam outlet 45 to mounting direction. The beam has a constant brightness over most of the line length. Laser with beam outlet in mounting direction or 90 to it have to be fixed high above the center of your working table, UD-lasers may be attached low on left- or righthand side.


Features

  • Smallest housing
  • For extremely low mounting positions
  • Special optics for line of virtually constant brightness
  • Line brightness at the end of the UD line is 2,5 × higher than of a diode laser with classic optic design and similar power
  • 5 V power supply
  • 5 - 30 mW laser output

Models

Line lasers

Models Laser power Line length* Laser class                                            
LAP UD-PL 5 mW up to 3 m 1        
LAP UD-XL 10 mW up to 6 m 2        
LAP UD-XXL 15 mW up to 9 m 2        
LAP UD-XXXL 30 mW up to 12 m 2M        
* standard optics, line length depends on ambient light, height above surface, angle

Technical specifications

Laser type diode
Wavelength 635 nm
Laser colour red

Optics data

Divergence 0.5 mrad

Electronics data

Operating Voltage DC 4 ... 6 VDC
Power consumption < 200 mA

Housing data

Enclosure rating IP 42
Dimensions Length 70 mm × Ø 23 mm (front) / 15 mm (back)
Weight 40 g
Power connector M8, 3-core

System data

Application conditions -10 ... +40 °C, 35 - 90 % rel. humidity, non condensing
Output power 5 ... 30 mW

Documents and Files

File Date Size
UD Series laser projector datasheet (English) 14-09-2015 3.8MB
Lap-Laser laser product overview (English) 14-09-2015 1.6MB
UD Series laser projector 3D drawing (PDF format) (English) 14-09-2015 1.6MB
UD Series laser projector 3D drawing (IGES format) 14-09-2015 67KB
UD Series laser projector 3D drawing (SOLIDWORKS format) 14-09-2015 247KB
UD Series laser projector 3D drawing (STEP format) 14-09-2015 37KB
UD Series laser projector 3D drawing (VRML format) 14-09-2015 73KB
B2-LD bracket 3D drawing (PDF format, LD and UD Series compatible) (English) 14-09-2015 413KB
B2-LD bracket 3D drawing (IGES format, LD and UD Series compatible) 14-09-2015 15KB
B2-LD bracket 3D drawing (SOLIDWORKS format, LD and UD Series compatible) 14-09-2015 88KB
B2-LD bracket 3D drawing (STEP format, LD and UD Series compatible) 14-09-2015 10KB
B2-LD-K bracket 3D drawing (PDF format, LD and UD Series compatible) (English) 14-09-2015 607KB
B2-LD-K bracket 3D drawing (IGES format, LD and UD Series compatible) 14-09-2015 29KB
B2-LD-K bracket 3D drawing (SOLIDWORKS format, LD and UD Series compatible) 14-09-2015 91KB
B2-LD-K bracket 3D drawing (STEP format, LD and UD Series compatible) 14-09-2015 14KB
B2-LD-K bracket 3D drawing (VRML format, LD and UD Series compatible) 14-09-2015 9KB
B2-BKK-LD bracket 3D drawing (PDF format, LD and UD Series compatible) (English) 14-09-2015 913KB
B2-BKK-LD bracket 3D drawing (IGES format, LD and UD Series compatible) 14-09-2015 90KB
B2-BKK-LD bracket 3D drawing (SOLIDWORKS format, LD and UD Series compatible) 14-09-2015 338KB
B2-BKK-LD bracket 3D drawing (STEP format, LD and UD Series compatible) 14-09-2015 52KB
B2-BKK-LD bracket 3D drawing (VRML format, LD and UD Series compatible) 14-09-2015 141KB
B3-LD bracket 3D drawing (PDF format, LD and UD Series compatible) (English) 14-09-2015 1.7MB
B3-LD bracket 3D drawing (IGES format, LD and UD Series compatible) 14-09-2015 133KB
B3-LD bracket 3D drawing (SOLIDWORKS format, LD and UD Series compatible) 14-09-2015 786KB
B3-LD bracket 3D drawing (STEP format, LD and UD Series compatible) 14-09-2015 65KB
B3-LD bracket 3D drawing (VRML format, LD and UD Series compatible) 14-09-2015 350KB