+55 (16) 3371-0112 •

T24-VA - Wireless Voltage Measurement Acquisition Module

Image T24-VA

This acquisition module provides wireless voltage measurement for an input range of 0 to 10Volts. Suitable for a range of 0-10V sensors such as pressure, inclinometer, accelerometer, temperature & displacement. The small module size allows for the option of embedding it within the sensor housing. Provides 5V sensor power.

Low power modes allow the T24-VA wireless current sensor acquisition module to ‘power down’ between transmissions or to ‘power off’ completely and can be controlled by other T24 products such as the handheld displays or a base station. The module can be configured to last several years on 2 x alkaline AA batteries or alternatively powered from 2 x NiMH or 1 x 3V Lithium.

The high accuracy, low noise measurement electronics in the T24-VA deliver high resolution, low drift results which can be user calibrated over 9 points to enable linearization and to deliver results in user definable engineering units. The results can be transmitted wirelessly at rates up to 200 per second to other T24 devices such as handheld displays, analog outputs and base stations etc.

Although this module can be used ‘as is’ for OEM solutions there are a number of enclosure options available. The module is configured and calibrated (either by applying known inputs or by table entry) using free T24 Toolkit software which runs on a PC connected to a T24 base station.

Integral antenna option offers up to 800m (2600 ft) range and external antenna options allows up to 800m (2600 ft) range in an open field site. 

The licence free 2.4 GHz direct sequence spread spectrum (DSSS) radio telemetry technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. FCC, ETSI and IC approvals. 


Technical Specifications

T24-VA 

General Radio

  Min  Typical  Max   Units
 Licence    Licence Exempt    
 Modulation Method    MS(QPSK)    
 Radio Type    Transceiver (2 way)    
 Data Rate    250    K bits/sec
 Radio Frequency  2.4000    2.4835  GHz
 Power    1    mw
 Integral Antenna      120 (400)  Metres (feet) *
External Antenna      800 (2600)  Metres (feet) *
Channels (DSSS)   16    
 *Maximum range achieved in open field site with the T24 acquisition module at a height of 3 metres (9.8 feet) above ground and T24-HS held at chest height pointing towards the acquisition module. Specification at 3V supply at 25°C 
Specification at 3V supply at 25 Deg C    
Input Range Sensitivity (FR) 0 - 10 Volts
Gain Temperature Stability - - 50 ppm/C
Non Linerarity Before Linearization - 5 25 ppm of FR
Internal Resolution - 16,000,000/24 - Resolution/ Bits
Input Impedence - 100k - Ohms
Input Calibration Accuracy - - 0.1 %FR
Noise Free where Sample TIme < 10mS - 5,000/12.25   Resolution/ Bits
Noise Free where Sample Time < 100mS - 8,000/13.0   Resolution/ Bits
Noise Free where Sample Time < 1000mS - 11,000/13.5   Resolution/ Bits
Noise Free where Sample Time > 1000mS - 15,000/13.75   Resolution/ Bits
Electrical
Power Supply Voltage 2.1 3.0 3.6 V dc
Power Supply Ripple     50 mV ac pk-pk
Power Supply Current
Normal Mode on Constantly   40 45 mA
Sleep Mode   5 20 uA
Environmental
Operating Temperature Range -40   +85 C
Storage Temperature -40   +85 C
Humidity 0   95 %RH

Battery Life in Low Power Mode Generating Results at 3Hz

Battery Usage Battery Life
Pair AA Cells Constantly On 1 Month
Pair AA Cells 12 sessions per day of 5 minutes 2 Years
Pair D Cells Constantly On 2.5 Months
Pair D Cells 12 sessions per day of 5 minutes 5 Years

   Module transmits and Receives giving: 1. Full error detection and correction 2. Ability to switch to low power modes 3. Calibration & configuration via radio telemetry 4. Ability to be switched from sleep to operating mode via radio 5. Calibration stored within the module 6. Remote battery check


Order Info

T24-VA Module Code
Voltage Acquisition with fitting for External Antenna T24-VAe
Voltage Acquisition with Internal Antenna T24-VAi