+55 (16) 3371-0112 •

T24-RM1 - Data Output Wireless Relay Module

Image T24-RM1

This wireless relay module offers dual power relays capable of mains power switching. These relays can be configured as high, low or window alarms and can be associated with a group of up to eight T24 acquisition modules per relay.

Relays can operate when the sum of the assigned acquisition modules reach a setpoint or when any of the modules reach the setpoint. There is also a mode where the difference between the lowest and highest value is compared to the setpoint. This is ideal for applications where you are looking for a group of weights to be within a certain band. i.e. balancing four corners of a weigh scale or a hanging truss.

Relays can be latched and a digital input or external command can be used to reset them. An alarm/error signal relay is operated if communication is lost or other selectable errors occur and this alarm resets once the source of the alarm or error is removed.

The license free 2.4GHz direct sequence spread spectrum (DSSS) radio technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. FCC, ETSI and IC approvals.

The module is configured using free T24 Toolkit software which runs on a PC connected to a T24 base station and is supplied in an IP67 sealed ABS case but a DIN rail option is available

Internal antenna offers up to 800m (2600 ft) range in an open field site.

Technical Specifications


Parameter Min Typical Max Units Notes
IP Rating   IP67 /      
Supply Voltage Range 9 12 32 Volts  
Operational Current No Relays Active - 50mA   mA  At 12V supply tbc
Operational Current All Relays Active - 12mA   mA  At 12V supply tbc
Operating Temperature Range -10 - 60 Deg C  
Storage Temperature Range -20 - 65 Deg C  
5 Amp Relays - 240V 5A      

Order Info

T24-RM1 Code
Data to Relay Module T24-RM1