T24-BC1 - Telemetry Charger Module for use with T24

This lithium battery charger module and power supply suitable for the T24 range of wireless telemetry acquisition modules.

From a 5 Volt supply the module produces a regulated 3.3V for the acquisition module and can also charge a suitable Li-ion Battery.

---

Specifications

Parameter	Min	Typical	Max	Units
Supply Voltage	4.1	5	6	V
Regulated Voltage Output	-	3.3	-	V
Battery Positive Connection	-	3.7	-	V
Maximum Cable Length	-	-	150*	mm
Dormant PCB Current	-	1.7		μA

* 07/02 gauge wire attached to maximum load i.e. T24-SA with four 350 Ohm strain gauges. Note: LED will only be lit when an input voltage is applied.

Battery Options

Varta LIP673450
Rated Capacity	1100mAh
Dimensions	35 x 54 x 7mm
Weight	20g
Charge Time	3hrs @ 466mA
Battery Life T24-SAi & e	1 month 25 days*
Varta LIC18650
Rated Capacity	2200mAh
Dimensions	18.25 Diameter 65mm Height
Weight	46g
Charge Time	4.5hrs @ 466mA
Battery Life	3 months 20 days*
UBC 581730
Rated Capacity	250mAh
Dimensions	18 x 31.5 x 5.8mm
Weight	6.5g
Charge Time	2hrs @ 133mA
Battery Life	7 days*

* Note: Battery life is calculated with a T24-SA running in low power mode with a sample time of 5mS and transmit interval of 333mS for 2 hours out of every 8 hours, to a 1k Ohm bridge.

---

Order Info

T24-BC1	Code
Battery Charger for only T24 OEM PCB Acquisition Modules	T24-BC1

Documents and Files

	File	Date	Size
	T24 telemetry batery charger T24-BC1 datasheet (English)	28-08-2015	626KB
	T24 telemetry batery charger T24-BC1 technical information (English)	28-08-2015	267KB