The Active Repeater for T24 Wireless Telemetry T24-AR is an active repeater designed to increase or extend range and overall coverage of T24 Wireless Telemetry Acquisition Modules. The repeater allows T24 modules to transmit around obstacles such as building or walls, etc.
The Active Repeater for T24 Wireless Telemetry acts as transparent link between the Acquisition modules and the Consumer, e.g Base Station or Handheld Display. The Repeater is powered by either a pair of alkaline ‘D’ Cells or an external power supply (5-18 Volts).
The T24-AR will allow messages to be repeated once which can effectively double the radio range. T24 has a range of up to 200m (650ft) without the use of a repeater. Adding multiple repeaters will not increase the range but can increase overall coverage.
|Battery Supply Voltage||2.1||3.0||3.6||V DC|
|External Power Supply Voltage (optional use)||5||-||18||V DC|
|IP Rating||IP67 /|
|Operating Temperature Range||-40||+65*||C|
|Modulation Method||MS (QPSK)|
|Radio Type||Transceiver (2 way)|
|Data Type||250||K bits/sec|
|Integral Antenna||100 (325)||Metres (feet) **|
|External Antenna||800 (1600)||Metres (feet) **|
* Check operating temperature batteries intended for use.
**Maximum range achieved in open field site at height of 3 metres (9.8 feet) above ground.
|Active repeater for wireless telemetry T24-AR datasheet (English)||28-08-2015||520KB|
|Active repeater for wireless telemetry T24-AR operating manual (English)||28-08-2015||907KB|
|T24 telemetry systems user's manual (English)||02-08-2021||12.3MB|
|T24 Toolkit v02.15.04 software - Configuration, calibration and testing of T24 range telemetry products||15-06-2023||7.0MB|
|T24 Windows Drivers - Development files (DLLs, COM drivers - ActiveX, .NET, LabView)||16-10-2018||6.2MB|