Pressure sensors

A pressure sensor is a device that senses pressure and converts it into an electric signal where the amount depends upon the pressure applied.

Metrolog offers a wide variety of models, with options ranging from the sensing element to system packaging for harsh environments, including models from board level components to fully amplified and packaged transducers.

Based on piezoresistive Micro-electromechanical systems (MEMS) and silicon strain gauge (Microfused, Krystal Bond) technology, our sensors measure everything from less than one inch of water column (<1.25 mbar) to 100kpsi (7kbar).

Analog output (0-10V, 4-20mA, mV, etc.)

Pressure sensor BCT22 Series

• Available measurement range (vacuum): 0 to -100 mBar, -1 to 0 Bar and 0 to -1 Bar • Available measurement range (gauge): 100mBar up to 600Bar • Measurement type: vacumm or gage • Output: 0~10V, 0~5V, 1~6V, 0.5~4.5V, 0.5~5.5V, 1-5V, 1-10V, 4-20mA (2-wire) 0-20mA (3-wire) or CANOpen • Pressure ports: G1/4, G1/8, G1/2, NPT1/4, NPT1/8, NPT1/2, M14x1, UNF7/16x20M, UNF7/16x20F • Electrical connection: integrated cable, Packard Metripak, DIN43650-A, DIN43650-C, M12x4pin, M12x5pin (for CANOpen) • Operating Temperature from -40°C to +85°C • IP65 or IP67 protection grade

Pressure sensor M5200 Series

• Available measurement range (psi differential): 0-50, 0-100, 0-200, 0-300, 0-500, 0-1k, 0-3k, 0-5k, 0-7k, 0-10k and 0-15k psi • Available measurement range (bar differential): 0-3.5, 0-7, 0-14, 0-20, 0-35, 0-70, 0-200, 0-350, 0-500, 0-700 and 0-1k bar • Measurement type: gage, sealed, compound • Output: mV, 0.5-4.5V, 1-5V, 0-5V, 0-10V, 1-6V, 4-20mA • Pressure ports: 1/8, 1/4, 3/8, 7/16, M10, M12, M14, M20 (refer to documentation) • Electrical connection: integrated cable, Packard Metripak, Bayonet, M12, Amp, Sumitomo (refer to documentation) • Operating Temperature from -40°C to +125°C

Digital interface (CANOpen)

Pressure sensor BCT22 Series

• Available measurement range (vacuum): 0 to -100 mBar, -1 to 0 Bar and 0 to -1 Bar • Available measurement range (gauge): 100mBar up to 600Bar • Measurement type: vacumm or gage • Output: 0~10V, 0~5V, 1~6V, 0.5~4.5V, 0.5~5.5V, 1-5V, 1-10V, 4-20mA (2-wire) 0-20mA (3-wire) or CANOpen • Pressure ports: G1/4, G1/8, G1/2, NPT1/4, NPT1/8, NPT1/2, M14x1, UNF7/16x20M, UNF7/16x20F • Electrical connection: integrated cable, Packard Metripak, DIN43650-A, DIN43650-C, M12x4pin, M12x5pin (for CANOpen) • Operating Temperature from -40°C to +85°C • IP65 or IP67 protection grade

Wireless (Bluetooth)

5600 Series Wireless Pressure Transducer

• Bluetooth 4.0 wireless pressure sensor • Available measurement ranges: 50psi (3.5bar) up to 15000psi (1000bar) • Gage, sealed, compound versions • ±0.25% Pressure Accuracy • -20°C to +85°C Operating Temperature • Stainless steel and polycarbonate enclosure • Weatherproof (IP66 / IP67)