+55 (16) 3371-0112 •

PP1 & SP1 - Power Pack 1 & Solar Panel 1

Image PP1 & SP1

A high capacity battery pack with solar and mains charging providing long term 12 Volt power for field applications, specifically T24-RDC Remote Data Collection Device. The Power Pack 1 & Solar Panel 1 PP1 & SP1, provides dependable off-grid power generation to support a variety of products.

Packaged in an IP65 / NEMA 4 sealed case with rugged waterproof connectors the PP1 has two sources of charge for the internal battery with both solar and mains power input charging. The case also features stainless steel padlock protectors for easily securing your supply on site.

The PP1 has a single 12 Volt fuse protected output. The mating connector comes pre-fitted with 5 metres of cable and bare end connections. 

The SP1 solar panel features hail-proof tempered glass and closely packed polycrystalline cells, sealed into a robust aluminium frame. The junction box on the rear of the panel does not protrude beyond the frame, so installation can be simple and neat. The solar cell comes with 3 metres of cable as standard longer lengths are available on request.

The SP1 & PP1 combined are designed to provide a perpetual power supply for a 12 V system drawing an average of 53mA, even during winter. The PP1 Power Pack 1, can also be used as a mains 12V DC supply with battery back up.


Specifications

Electrical Min Typ Max Units
Output Voltage   12   V DC
Internal Capacity   33   AHr
External Power Supply Voltage 100 - 240 Volts AC
Input Frequency 47 - 63 Hz
Cable Lengths
12V Output Cable to Bare End   5   m
Solar Panel to Power Pack   3   m
Mains Charging Cable supplied with 13 Amp plug   0.8   m
Environmental     
IP Rating (& Connectors)   IP65    
Operating Temperature Range. When being charged from mains min operating temperature 0°C max operating temperature if 40°C -20   +50 C
Storage Temperature -200   +50 C
Humidity 0   95 %RH
Case Materials Polypropylene

Order Info

  Code
Power Pack T24-PP1
Solar Panel T24-SP1