Diode lasers of LAP XtrAlign UD Series are designed for installation low above the working surface.
The XtrAlign UD series was the answer on customers requests for a laser with small housing like LD series, line length and quality of UltraLine to be built in low above working level.
The main target for XtrAlign UD lasers are veneer or sheet metal shears, as well as any place where you have little headroom but you need a long line, starting directly below the laser. You need a 4 m line, you only have 50 cm of height and the laser must be installed on one side of the opening ? Then you need a XtrAlign UD laser!
The laser line starts directly below the laser, caused by a cylindrical lens and the beam outlet 45 to mounting direction. The beam has a constant brightness over most of the line length. Laser with beam outlet in mounting direction or 90 to it have to be fixed high above the center of your working table, UD-lasers may be attached low on left- or righthand side.
Features
Smallest housing
For extremely low mounting positions
Special optics for line of virtually constant brightness
Line brightness at the end of the UD line is 2,5 × higher than of a diode laser with classic optic design and similar power
12~30VDC power supply
1 - 40 mW laser output
Demonstration video
Models
Line lasers (HU-52 Green)
Models
Laser power
Line length*
Laser class
LAP 1 HU-52
1 mW
up to 1 m
1
LAP 3 HU-52
3 mW
up to 2 m
1
LAP 5 HU-52
5 mW
up to 4 m
1
LAP 10 HU-52
10 mW
up to 6 m
1
LAP 15 HU-52
15 mW
up to 10 m
1
LAP 30 HU-52
30 mW
up to 15 m
2
LAP 40 HU-52
40 mW
up to 20 m
2
* standard optics, line length depends on ambient light, height above surface, angle
Line lasers (HU-63 Red)
Models
Laser power
Line length*
Laser class
LAP 1 HU-63
1 mW
up tp 1 m
1
LAP 3 HU-63
3 mW
up tp 2 m
1
LAP 5 HU-63
5 mW
up tp 4 m
1
LAP 10 HU-63
10 mW
up tp 6 m
1
LAP 15 HU-63
15 mW
up tp 10 m
1
LAP 30 HU-63
30 mW
up tp 15 m
2
* standard optics, line length depends on ambient light, height above surface, angle
Technical specifications
Laser type
diode
Wavelength
638 nm or 520nm
Laser colour
red or green
Optics data
Divergence
0.5 mrad
Electronics data
Operating Voltage DC
12 ... 30VDC
Power consumption
< 200 mA
Housing data
Enclosure rating
IP 67
Dimensions
Length 153 mm × Ø 30 mm (front) / 20 mm (back)
Weight
330 g
Power connector
M12, 4-core
System data
Application conditions
-10 ... +40 °C, 35 - 90 % rel. humidity, non condensing
[PT-BR] Português 
[EN] English