XtrAlign HD Red diode lasers are designed for use in rough industrial environment. They generate lines that are clearly visible even in daylight.
A rugged stainless steel housing protects laser diode, electronic circuitry and precision optics.
The laser diode is galvanically separated from the power supply, which makes the laser extremely resistant to voltage peaks or current variations.
The wide range input capacity enables the XtrAlign HD lasers to be used with all typical low voltage power nets.
The optics may be focused without tools. Spot size or line width can be adjusted. The line position doesn't change during focusing.
Features
- Focusable
- Line, spot, crosshair lasers
- Small, robust stainless steel housing
- IP 67, waterproof
- 1 - 30 mW laser output
- Protected from voltage variations
- Reverse polarity protected
- 24 V power supply
- Available opening angles line: 10°, 20°, 30°, 40°, 80° (standard)
- Available opening angles cross: 38°, 62°(standard)
Demonstration video
Models
Line lasers
| Models | Laser power | Line length* | Laser class | Laser class | Laser class | Laser class | Laser class |
| | | 80° | 80° | 40° | 30° | 20° | 10° |
| LAP 1 HDL | 1 mW | up to 1 m | 1 | 1 | 1 | 1 | 1 |
| LAP 3 HDL | 3 mW | up to 2 m | 1 | 1 | 2 | 2 | 2 |
| LAP 5 HDL | 5 mW | up to 4 m | 1 | 2 | 2 | 2 | 2 |
| LAP 10 HDL | 10 mW | up to 6 m | 2 | 2M | 2M | 2M | 2M |
| LAP 15 HDL | 15 mW | up to 10 m | 2 | 2M | 2M | 2M | 2M |
| LAP 30 HDL | 30 mW | up to 20 m | 2M | 3R | 3R | 3R | 3R |
| * standard optics, line length depends on ambient light, height above surface, angle |
Crosshair lasers
| Models | Laser power | Laser class | Laser class | | | | |
| | | 62° | 38° | | | | |
| LAP 1 HDX | 1 mW | 1 | 1 | | | | |
| LAP 3 HDX | 3 mW | 1 | 1 | | | | |
| LAP 5 HDX | 5 mW | 2 | 1 | | | | |
| LAP 10 HDX | 10 mW | 2M | 2 | | | | |
| LAP 15 HDX | 15 mW | 2M | 2 | | | | |
| LAP 30 HDX | 30 mW | 2M | 2M | | | | |
Point lasers
| Models | Laser power | Laser class | | | | | |
| LAP 1 HDP | 1 mW | 2 | | | | | |
| LAP 3 HDP | 3 mW | 3R | | | | | |
| LAP 5 HDP | 5 mW | 3R | | | | | |
| LAP 10 HDP | 10 mW | 3B | | | | | |
| LAP 15 HDP | 15 mW | 3B | | | | | |
| LAP 30 HDP | 30 mW | 3B | | | | | |
Technical specifications
| Laser type | diode |
| Wavelength | 635 nm |
| Laser colour | red |
Optics data
| Divergence | 0.5 mrad |
| Focus adjustment | manually, without tools |
Electronics data
| Operating Voltage DC | 12 ... 30 VDC |
| Operating Voltage AC | 15 ... 20 VAC |
| Power consumption | < 200 mA |
Housing data
| Enclosure rating | IP 67 |
| Dimensions | Length 140 mm × Ø 25 mm (front) / 20 mm (back) |
| Weight | 220 g |
| Power connector | M 12, 4-core |
System data
| Application conditions | -10 ... +40 °C, 35 - 90 % rel. humidity, non condensing |
| Output power | 1 ... 30 mW |
[PT-BR] Português 
[EN] English