XtrAlign FD diode lasers are designed for use in rough industrial environment. They generate lines that are clearly visible even in daylight.
A rugged stainless steel housing protects laser diode, electronic circuitry and precision optics.
The laser diode is galvanically seperated from the power supply, which makes the laser extremely resistant to voltage peaks or current variations.
The wide range input capacity enables the XtrAlign FD lasers to be used with all typical low voltage power nets.
Features
- Fixed Focus
- Line lasers only
- Small, robust stainless steel housing
- IP 67, waterproof
- 1 - 30 mW laser output
- Protected from voltage variations
- Reverse polarity protected
- 24 V power supply
Demonstration video
Models
Line lasers
| Models | Laser power | Line length* | Laser class | | | | |
| LAP 1 FDL | 1 mW | up to 1 m | 1 | | | | |
| LAP 3 FDL | 3 mW | up to 2 m | 1 | | | | |
| LAP 5 FDL | 5 mW | up to 4 m | 1 | | | | |
| LAP 10 FDL | 10 mW | up to 6 m | 2 | | | | |
| LAP 15 FDL | 15 mW | up to 10 m | 2 | | | | |
| LAP 30 FDL | 30 mW | up to 20 m | 2 | | | | |
| * standard optics, line length depends on ambient light, height above surface, angle |
Techinical Specifications
| Laser type | diode |
| Wavelength | 635 nm |
| Laser colour | red |
Optics data
Electronics data
| Operating Voltage DC | 12 ... 30 VDC |
| Operating Voltage AC | 15 ... 20 VAC |
| Power consumption | < 200 mA |
Housing data
| Enclosure rating | IP 67 |
| Dimensions | Length 131 mm, Ø 25 mm (front) / 20 mm (back) |
| Weight | 190 g |
| Power connector | M 12, 4-core |
System data
| Application conditions | -10 ... +40 °C, 35 - 90 % rel. humidity, non condensing |
| Output power | 1 ... 30 mW |
[PT-BR] Português 
[EN] English