Pressure transducer model 1210
The Model 1210 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual-in-line configuration. It is intended for cost sensitive applications where excellent performance and long-term stability are required. |
|
Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors.
An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier. This provides sensitivity interchangeability of ±1%. Gage, absolute, and differential pressure ranges from 0-2 PSI to 0-100 PSI are available.
Multiple lead and tube Configurations are also available for customizing the package for specific applications. Please refer to the low pressure section for information on products with operating pressures less than 0-2 PSI.
For a compensated sensor using a current set resistor as opposed to a gain set resistor, please refer to the Model 1220.
Available models
- Available measurement range: 0-1 psi (low pressure) and 0-2 psi to 0-100 psi (medium pressure)
- Pressure measurement: gauge, absolute and differential
- Package: DIP (8 pins, 0.100" step)
Features
- Dual-in-line Package
- ±0.1% Non-linearity
- ±0.5% Temperature Performance
- 1.0% Interchangeable Span
(provided by gain set resistor)
- Solid State Reliability
- Low Power
Applications
- Process Control
- Medical Instrumentation
- HVAC
- Barometric Pressure
- Air Flow Management
- Avionics