LVDT Sensors Accessories
Alternative probe tips, mounting blocks and rod-end bearing for many different applications. Please check sensor model compatibility before ordering.
Alternative Probe Tips
Alternative probe tips available for many of the spring return LVDT transducers. These items may be less resistant to corrosion and temperature than the rest of the transducer. |
|
PROB1001D = 7.0mm to 8.5mm nominal |
|
PROB1002D = 6mm |
|
PROB1003D = 8mm |
|
PROB1010D = 10mm |
|
PROB1008D = 12mm |
|
PROB1015D = 15mm |
|
PROB1013D = 20mm |
|
PROB1012D = 25mm |
|
PROB1006D = 6mm |
 |
PROB1007D = 8mm |
 |
PROB1009Radius = 8.0mm |
 |
PROB1017Radius = 9.5mm |
|
PROB1022Radius = 0.8mm |
 |
PROB1011Radius = 0.8mm |
|
PROB1023ARadius = 0.8mm |
|
PROB1024Radius = 0.8mm |
|
PROB1033Radius = 3mm |
 |
PROB1016Radius = 6mm |
 |
PROB1018Radius = 2mm |
 |
PROB1019Radius = 4mm |
|
PROB1020D = 8mm |
 |
PROB1021D = 8mm |
 |
PROB1035D = 6mm |
 |
PROB1036D = 8mm |
 |
PROB1025D = 5mm |
 |
PROB1026D = 5mm |
|
PROB1027D = 5mm |
|
PROB1028D = 5mm |
|
PROB1029D = 5mm |
|
PROB1030D = 5mm |
|
PROB1031D = 5mm |
|
PROB1032D = 5mm |
|
PROB1004Radius = 1.5mm |
 |
TIP 67010005Thread = 4-48 AGD |
 |
TIP 67010006Thread = 4-48 AGD |
 |
TIP 67010002Thread = 4-48 AGD |
 |
TIP 67010007Thread = 4-48 AGD |
 |
TIP 67010008Thread = 4-48 AGD |
 |
TIP 67010009Thread = 4-48 AGD |
 |
TIP 67010010Thread = 4-48 AGD |
 |
TIP 67010001Thread = 4-48 AGD |
 |
TIP 67010011Thread = 4-48 AGD |
 |
Mouting Blocks
The mounting block offers a means of supporting our transducers. We suggest that at least 2 are used per transducer and for longer stroke units 3 or 4. For very high accuracy or physically demanding applications, you may wish to use metal mounting blocks. |
|
MB01D = 20.6mm |
|
MB02D = 9.5mm or 8mm |
|
Schaevitz Mouting Blocks
Material = Reinforced Phenolic and other nonconductive materials
04560950-000A diameter = 0.77" (19.56mm) |
|
04560952-000A diameter = 0.83" (21.08mm) |
|
04560953-000A diameter = 0.33" (8.38mm) |
|
04560954-000A diameter = 0.39" (9.90mm) |
|
04560956-000A diameter = 0.49" (12.45mm) |
|
Rod-End Bearings
Rod-end bearings can be used with captive type transducers where there may be some mis-alignment They should not be used horizontally if the transducer range is greater than ±100mm. For ranges larger than this you may wish to consider using our Mounting block. The major construction material is Plated low carbon steel. Operating temperature from -35°C to 170°C. |
|
BRG1001Thread = M5x0.8, 14mm |
BRG1000Thread = M5x0.8, 14mm |
