Laser diode RD Series

RD linelasers series have a proven track in day to day industrial use. They offer the largest variety of optics and accessories.

Points, lines or crosshairs may be projected along the lasers' axis or 90 to it. The laser beam is collimated to minimize spot size and to give sharp lines.

RD Lasers

The robust housing made of coated aluminium protects laser diode, control circuitry and precision optics. RD lasers can be directly connected to 110 or 230 VAC, and they are surge protected.

Features

Special optical accessories
Line, spot, crosshair lasers
Robust aluminum housing
IP 54
1 - 30 mW laser output
Immune against power line spikes and surges
90 - 265 VAC power supply

Models

Output power	Line laser	Line length *	Crosshair laser	Spot laser
1 mW	LAP 1 RDL	up to 1 m	LAP 1 RDX	LAP 1 RDP
3 mW	LAP 3 RDL	up to 2 m	LAP 3 RDX	LAP 3 RDP
5 mW	LAP 5 RDL	up to 4 m	LAP 5 RDX	LAP 5 RDP
10 mW	LAP 10 RDL	up to 7 m	LAP 10 RDX	LAP 10 RDP
15 mW	LAP 15 RDL	up to 12 m	LAP 15 RDX	LAP 15 RDP
30 mW	LAP 30 RDL	up to 22 m	LAP 30 RDX	LAP 30 RDP

* depends on ambient light, height above surface, angle

Laser Classes

Output
power

Line laser with opening angle *
80	40	30	20	10

Crosshair laser

Spot laser

1 mW

3 mW

5 mW

10 mW

15 mW

30 mW

* Standard optic: 80

General Data

Laser type, wavelength	Diode, 635 nm, red (optional: 670 nm)
Divergence	0,5 mrad
Power supply	90 - 265 VAC, 50/60 Hz
Power consumption	< 1,5 W
Ambient conditions	-10 ... +40 C, 35 - 90 % rel. humidity, non condensing
Dimensions	Length 210 mm × Ø 55 mm
Enclosure rating	IP 54
Shock and vibration	Up to 5g

Accessories

B1-RD	Bracket for flat surfaces Fine adjustment by set screws Degrees of freedom: turn around longitudinal axis, turn around vertical axis, turn around horizontal axis
B2-RD	Bracket for mounting on a pole (select diameter of pole for order: 20, 22 or 25 mm). Degrees of freedom: turn around longitudinal axis, turn around pole axis, slide on pole.
B2-RD-J	Bracket for mounting on a pole (select diameter of pole for order: 20 or 25 mm). Degrees of freedom: turn around longitudinal axis, turn around pole axis, turn around vertical axis (± 5 ), slide on pole.
B2-RD	Mount for flat surfaces Vernier adjustment Degrees of freedom: turn around longitudinal axis, turn around vertical axis and move vertically (vernier).
B5-RD	Mount for flat surfaces Vernier adjustment Degrees of freedom: turn around longitudinal axis (vernier), turn around vertical axis (vernier), turn around horizontal axis (vernier)