Laser diode LD Series

Diode lasers of LAP LD Series are designed for industrial applications. They project spots or lines even visible in daylight. The optics, which produce a high quality collimated beam, can be focused to adjust the spot size or line width to suit application and distance.

Laser diode, collimating lens and electronic circuitry are housed in a strong cylindrical aluminum case.

LD Lasers

LD crosshair laser picture of product details LD spot laser picture of product details LD line laser picture of product details The compact size of these diode lasers makes them ideal for applications where space is limited such as installation within existing machinery.

Each unit has a built-in protection against over-voltage and reverse polarity, along with a softstart function and a keyed industrial connector.

Features

Focusable
Line, spot, crosshair lasers
Smallest housing
1 - 30 mW laser output
Protected from voltage variations
Reverse polarity protected
5 V

Models

Output power	Line laser	Line length *	Crosshair laser	Spot laser
1 mW	LAP 1 LDL	up to 1 m	LAP 1 LDX	LAP 1 LDP
3 mW	LAP 3 LDL	up to 2 m	LAP 3 LDX	LAP 3 LDP
5 mW	LAP 5 LDL	up to 4 m	LAP 5 LDX	LAP 5 LDP
10 mW	LAP 10 LDL	up to 6 m	LAP 10 LDX	LAP 10 LDP
15 mW	LAP 15 LDL	up to 10 m	LAP 15 LDX	LAP 15 LDP
30 mW	LAP 30 LDL	up to 20 m	LAP 30 LDX	LAP 30 LDP

* depends on ambient light, height above surface, angle

Laser Classes

Output
power

Line laser with opening angle *
80	40	30	20	10

Crosshair laser

Spot laser

1 mW

3 mW

5 mW

10 mW

15 mW

30 mW

* Standard optic: 80

General Data

Laser type, wavelength	Diode, 635 nm, red (optional: 670 nm)
Divergence	0,5 mrad
Power supply	4 - 6 VDC
Power consumption	< 200 mA
Ambient conditions	-10 ... +40 C, 35 - 90 % rel. humidity, non condensing
Dimensions	Length 81 mm × Ø 19 mm (front) / 15 mm (back)
Enclosure rating	IP 42

Accessories

B2-LD	Basic bracket, threaded holes in lower side Degrees of freedom: turn around longitudinal axis.
B3-LD	Bracket for mounting on a pole (select diameter of pole for order: 10, 15 or 20 mm). Degrees of freedom: turn around longitudinal axis, turn around pole axis, turn around vertical axis (± 5 ), slide on pole.
B2-KIPP	Bracket for tilting, threaded hole in bottom. Degrees of freedom: turn around longitudinal axis, turn around horizontal axis
BKK with B2-LD	B2-LD on ball head. The ball head's base has a threaded hole. Degrees of freedom: turn around longitudinal axis, turn around all room axes.
Power Supply	Basic plug-in power supply for 230V or 110 V.