Documentation

»Catálogo HD Diodes Series Catalog

 

 

 

 

Laser diode HD Series

HD diode lasers are designed for use in rough industrial environment. They generate lines that are clearly visible even in daylight.

A rugged stainless steel housing protects laser diode, electronic circuitry and precision optics.

HD Lasers

The laser diode is galvanically separated from the power supply, which makes the laser extremely resistant to voltage peaks or current variations.

The wide range input capacity enables the HD lasers to be used with all typical low voltage power nets.

The optics may be focused without tools. Spot size or line width can be adjusted. The line position doesn't change during focusing.

Features

  • Focusable
  • Line, spot, crosshair lasers
  • Small, robust stainless steel housing
  • IP 67, waterproof
  • 1 - 30 mW laser output
  • Protected from voltage variations
  • Reverse polarity protected
  • 24 V power supply

Models

Output
 power		 Line laser Line length * Crosshair laser Spot laser
   1 mW  LAP   1 HDL up to   1 m LAP   1 HDX LAP   1 HDP
   3 mW  LAP   3 HDL up to   2 m LAP   3 HDX LAP   3 HDP
   5 mW  LAP   5 HDL up to   4 m LAP   5 HDX LAP   5 HDP
 10 mW  LAP 10 HDL up to   6 m LAP 10 HDX LAP 10 HDP
 15 mW  LAP 15 HDL up to 10 m LAP 15 HDX LAP 15 HDP
 30 mW  LAP 30 HDL up to 20 m LAP 30 HDX LAP 30 HDP

* depends on ambient light, height above surface, angle

Laser Classes

 Output
 power
Line laser with opening angle *
80 40 30 20 10
Crosshair laser Spot laser
   1 mW 
2 2 2 2 2
2 2
   3 mW 
2 2M 2M 2M 2M
2 3R
   5 mW 
2M 3R 3R 3R 3R
2 3R
 10 mW 
2M 3R 3R 3R 3R
2M 3B
 15 mW 
2M 3B 3B 3B 3B
2M 3B
 30 mW 
3B 3B 3B 3B 3B
2M 3B

* Standard optic: 80

General Data

Laser type, wavelength
 Diode, 635 nm, red (optional: 670 nm)
Divergence
 0,5 mrad
Power supply
 12 - 30 V DC, 15 - 20 V AC
Power consumption
 < 200 mA
Ambient conditions
 -10 ... +40 C, 35 - 90 % rel. humidity, non condensing
Dimensions
 Length 130 mm × Ø 20 mm
Enclosure rating
 IP 67

Accessories

B2-HD
  • Basic bracket, threaded holes in lower side
  • Degrees of freedom: turn around longitudinal axis.
B3-HD
  • Bracket for mounting on a pole (select diameter of pole for order: 10, 15 or 20 mm).
  • Degrees of freedom: turn around longitudinal axis, turn around pole axis, turn around vertical axis (± 5 ), slide on pole.
B2-FD
  • Bracket for mounting on a pole (select diameter of pole for order: 10, 15 or 20 mm).
  • Degrees of freedom: turn around longitudinal axis, turn around pole axis, turn around vertical axis (± 5 ), slide on pole.
B2-FD-J
  • Bracket for mounting on flat surfaces
  • Degrees of freedom: turn around longitudinal axis, turn around vertical axis (± 5 ), slide horizontally.
BKK with B2-HD
  • B2-HD on ball head. The ball head's base has a threaded hole.
  • Degrees of freedom: turn around longitudinal axis, turn around all room axes.
Power Supply
  • Basic plug-in power supply for 230V or 110 V.