Laser diode FD Series

FD diode lasers are designed for use in rough industrial environment. They generate lines that are clearly visible even in daylight.

A rugged stainless steel housing protects laser diode, electronic circuitry and precision optics.

FD Lasers

The laser diode is galvanically seperated from the power supply, which makes the laser extremely resistant to voltage peaks or current variations.

The wide range input capacity enables the FD lasers to be used with all typical low voltage power nets.

Features

  • Fixed Focus
  • Line lasers only
  • Small, robust stainless steel housing
  • IP 67, waterproof
  • 1 - 30 mW laser output
  • Protected from voltage variations
  • Reverse polarity protected
  • 24 V power supply

Models and Laser Class

 Output
 power		 Line laser Line length * Laser class**
   1 mW  LAP   1 FDL up to   1 m 2
   3 mW  LAP   3 FDL up to   2 m 2
   5 mW  LAP   5 FDL up to   4 m 2
 10 mW  LAP 10 FDL up to   6 m 2M
 15 mW  LAP 15 FDL up to 10 m 2M
 30 mW  LAP 30 FDL up to 20 m 2M

* depends on ambient light, height above surface, angle   ** with standard optic 80

General Data

Laser type, wavelength
 Diode, 635 nm, red (optional: 670 nm)
Divergence
 0,5 mrad
Power supply
 12 - 30 V DC, 15 - 20 V AC
Power consumption
 < 200 mA
Ambient conditions
 -10 ... +40 C, 35 - 90 % rel. humidity, non condensing
Dimensions
 Length 130 mm × Ø 20 mm
Enclosure rating
 IP 67

Accessories

B2-HD
  • Basic bracket, threaded holes in lower side
  • Degrees of freedom: turn around longitudinal axis.
B3-HD
  • Bracket for mounting on a pole (select diameter of pole for order: 10, 15 or 20 mm).
  • Degrees of freedom: turn around longitudinal axis, turn around pole axis, turn around vertical axis (± 5 ), slide on pole.
B2-FD
  • Bracket for mounting on a pole (select diameter of pole for order: 10, 15 or 20 mm).
  • Degrees of freedom: turn around longitudinal axis, turn around pole axis, turn around vertical axis (± 5 ), slide on pole.
B2-FD-J
  • Bracket for mounting on flat surfaces
  • Degrees of freedom: turn around longitudinal axis, turn around vertical axis (± 5 ), slide horizontally.
BKK with B2-HD
  • B2-HD on ball head. The ball head's base has a threaded hole.
  • Degrees of freedom: turn around longitudinal axis, turn around all room axes.
Power Supply
  • Basic plug-in power supply for 230V or 110 V.