CAD-PRO 3D CatalogCAD-PRO 3D Laser Projection System
CAD-PRO 3D laser projectors are optimized for projection on curved surfaces. Working with complex surfaces requires 3D display calculation. CAD-PRO 3D laser projectors are equipped with special hardware, high-speed firmware and 3D software to meet this challenge. |
|
For large area projection, several projectors may be combined. They serve bordering projection areas with flexible overlap. Load balancing distributes the projection according to area and reach of the joined projectors.
Maintenance or defect is no reason for production downtimes: LAP CAD-PRO are small, light-weight and only connected by one cable. Your personnel may change a projector within minutes, helped by the one-screw tilt bracket and scaffolds with lowering mechanism.
Features
- Multicolor projection (red, green, yellow)
- Highest precision
- Easy multi-projector applications
- Small housing and little weight
General Data
| Laser type, wavelength | Red: Diode, 635 nm Green: DPSS (diode pumped solid state), 532 nm Yellow: overlay red and green |
| Accuracy | ± 0,5 mm up to 4 m distance * |
| Line width | < 1 mm up to 4 m distance * |
| Maximum projection angle | 80 |
| Laser output power | 5 mW |
| Laser class | 2M |
| Enclosure rating | IP 54 |
| Ambient conditions | 0 - 40 °C, 35 - 85 % rel. humidity, non-condensing |
| Power supply | 24 VDC |
| Interfacing | RS 485, Ethernet UDP |
| Dimensions | 300 × 110 × 110 mm (L × W × H) |
| Weight | ca. 3 kg |
* Projection angle < 60°, assuming correct calibration and focussing in projection color, surface perpendicular to laser beam