CAD-PRO 2D CatalogCAD-PRO 2D Laser Projection System
CAD-PRO 2D laser projectors are optimized for projection on flat surfaces. LAP laser projectors can be equipped with either one or two laser sources. You may select red, green or multicolor (red, green and yellow) projection. CAD-PRO 2D display templates or outlines from CAD data. Display to correct scale is given by calibration, using targets at previously measured positions. |
|
Large area projection is done with several projectors positioned side by side. Load balancing is included in PRO-SOFT display software.
Step by step workflow may be supported by using structured data files.
Features
- Faster workflow
- Less crop
- Increase quality
- Up to three colors (red, green, yellow)
- Easy to attach
- Simple handling
General Data
| Laser type, wavelength | Red: Diode, 635 nm Green: DPSS (diode pumped solid state), 532 nm Yellow: overlay red and green |
| Accuracy | ± 1 mm up to 4 m distance * |
| Line width | < 1 mm up to 4 m distance * |
| Maximum projection angle | 80 |
| Laser output power | 5 mW |
| Laser class | 2M |
| Enclosure rating | IP 54 |
| Ambient conditions | 0 - 40 °C, 35 - 85 % rel. humidity, non-condensing |
| Power supply | 24 VDC |
| Interfacing | RS 485, Ethernet UDP |
| Dimensions | 300 × 110 × 110 mm (L × W × H) |
| Weight | ca. 3 kg |
* Projection angle < 60°, assuming correct calibration and focussing in projection color, surface perpendicular to laser beam